» Overview flexible shafts
 
 

Manual control shafts
 
 
Complete standard shaft for professional adjusting mechanism. Includes core with coupling (cylindrical drill with set screw), plastic casing and handle.
 

» Enlargement
 
 
Downloads & Contact
» Technical description (pdf, 127 kB)
» Contact
 

 
 
Type Idem no. Min. bend radius
radius		 Torsional
deflection angle		 Breakage torque Dynamic torque
capacity
    [mm] 1) [] 2) [Ncm] 3) [Ncm] 4)
  clockwise
(right-hand
direction)		 Counter-
clockwise
(left-hand
direction)		   Direction
of
rotation		 Unwinding
of
rotation		 Direction
of
rotation		 Unwinding
of
rotation		 Direction
of
rotation		 Unwinding
of
rotation
HV6 7789501 7789502 180 4,5 10,5 1000 650 200130
HV8 7789601 7789602 240 1,2 3,5 4490 2800630390
HV10 7789701 7789702 300 0,5 1,5 6500 3900 980590
 
 
Type ØA ØB C ØD ØE ØF G ØH I L ØM N ØSW
  [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
HV6 15 13 10 6 15 6 69 28 77 13 M12 x1,0 70 7
HV8 19 16 10 8 18 8 72 37 85 18 M16 x1,5 100 9
HV10 22 19 12 10 22 10 76 40 92 19 M20 x1,5 120 11
 
Length K to be specified
 
 
Explanations:
X Last number:
1 for operation in clockwise (right-hand) direction
2 for operation in counter-clockwise (left-hand) direction
1) Min. bend radius: The bend radius cannot be smaller than this value.
2) Torsional deflection: Torsional deflection angle over 1 m shaft with torque of 10 Ncm.
3) Breaking torque: At this load the shaft will break.
4) Max. torque: Values applicable for straight shaft at speeds of 20% of maximum rated speed.
Explanations:
X Last number:
1 for operation in clockwise (right-hand) direction
2 for operation in counter-clockwise (left-hand) direction
1) Min. bend radius: The bend radius cannot be smaller than this value.
2) Torsional deflection: Torsional deflection angle over 1 m shaft with torque of 10 Ncm.
3) Breaking torque: At this load the shaft will break.
4) Max. torque: Values applicable for straight shaft at speeds of 20% of maximum rated speed.